TSD 6500 ADVANCED EXPANDABLE
DIGITAL TORQUE INDICATOR
The TSD 6500 is the most advanced Digital Torque Indicator serving the torque measurement industry. The TSD 6500 is capable of supporting up to eight (8) separate transducers with individual calibration capability in Clockwise and Counter-clockwise direction or modes. The exclusive “DUAL DISPLAY” feature displays two separate transducers simultaneously, affording the ability to read two transducers at the same time on the bright backlit VGA-LCD display module. This feature was designed to display and input information from (2) two transducers such as TORQUE and PRESSURE, TORQUE and FORCE or INPUT and OUTPUT torque, pressure, force or millivolts, each display has it’s own RS 232 I/O port.
The TSD 6500 ADVANCED DIGITAL TORQUE INDICATOR is “state of the art” programmable computer technology designed to offer the ultimate in TORQUE, FORCE, PRESSURE, VOLTAGE precise indication.
|TSD 1250 DIGITAL TORQUE INDICATOR
The TSD 1250 is the much improved successor to the legendary and time proven TSD 1200 Digital Torque Indicator is packaged in a rugged and versatile stainless steel enclosure with optional swivel stand. The new TSD 1250 is the latest in computer technology with a six digit .8” super bright LED display, simple front panel with “On/OFF” Switch, Push-button “ZERO”, “PEAK-HOLD” and First Peak with selectable auto or manual reset, Engineering Units conversion, Lb.Ft., Lb.In., Oz.In., Nm and Mkg.. Exclusive “CENTER of ZERO” and “AZM” (Automatic Zero Maintenance) features. Numeric keyed span and linearization adjustment in both CW (clockwise) and CCW (counter-clockwise) direction protected by a “Tamper-Proof” logo cover plate. Two independent full duplex RS 232 I/O ports for data transfer to acquisition and processing systems.
The TSD 1250 DIGITAL TORQUE INDICATOR is “state of the art” programmable computer technology designed to offer the ultimate in versatility in the precise measurement of TORQUE, FORCE, PRESSURE and VOLTAGE precise indication.
TSD 1250 DIGITAL TORQUE INDICATOR STANDARD FEATURES
- Large .8” (20.3 mm) LED Display.
- Stainless Steel NEMA 4X Enclosure
- Full numeric keyboard.
- Front panel power switch.
- Configurable for Ranges from 1 Lb.Ft. to 1,000,000 Lb.Ft. w/ conversions.
- Configurable conversion rate.
- Engineering Standards Conversions. Lb.Ft., Lb.In., Oz.In., Nm,.
- Exclusive “Center of Zero” and “Motion” indication
- Two independent communications ports. RS232 full duplex, 0-20 mA loop.
- Standard EDP command sets.
- Full Front panel digital configuration and calibration
- Universal mounting stand.
- Three stage digital filtering.
- Time & Date (volatile)
- Two digital inputs, two digital outputs.
- Analog Output, selectable 0-10 V, 4-20mA.
- Multi-Set-point feature.
- Pressure Standards, PSI / BAR
- Force Standards, Lb. Kg.
POWER - AC: Line Voltage: 115 or 230 VAC, .
POWER – DC: Line voltages: 9 – 36 VDC input.
Frequency: 50-60 Hz.
Power Consumption: 1.5 Amps max.
Power consumption: 1.5 A @ 115 VAC 8 W
.75 A @ 230 VAC 8 W
EXATATION VOLTAGE: 10 +/- .5 VDC.
ANALOG SIGNAL INPUT RANG: .5 mV/V – 4.5 mV/V
ANALOG SIGNAL SENSITIVITY: .3 microvolt/graduation minimum.
RESOLUTION: 8,000,000 internal counts. Display resolution: 100,000 counts.
A/D SAMPLE RATE: 7.5 to 60 Hz selectable.
SYSTEM LINEARITY: 0.01% IV. (Indicated Value) SYSTEM ACCURACY (with TSD Transducer): 0.1% IV
DIGITAL I/O: Two inputs with eight functions, two outputs 250mA max sink.
CIRCUIT PROTECTION: RFI, EMI, ESD protection.
SERIAL PORTS: Full Duplex RS 232.
DISPLAY: .8” (20mm) 6 digit Super Red LED. 7 segment.
KEYBOARD: 21 key membrane panel, tactile feel.
OPERATING TEMPERATURE: -10 C (14F) to 50 C (122F)
ENCLOSURE: Stainless Steel NEMA 4X
DIMENSIONS: 9.5” W* (240 mm) X 3.12” (79 mm) D X 6” (152 mm) H. * Excl. Knobs
WEIGHT: 6.8 Lbs. (3.1 Kg)
WARRANTY: 2 Year Limited warranty.