Transducer Calibration Equipment

Durable Torque Transducer Calibration Stands

At A.K.O., we understand that some facilities require the ability to perform transducer calibration in-house, whether to meet tight turnaround times, maintain strict quality control, or accommodate location-specific restrictions. That is why we offer a full range of torque transducer calibration equipment, including our robust torque transducer calibration stands, torque arms, weight pans, and precision weights.

In high-demand or highly regulated environments, such as nuclear power plants with restricted access zones or aerospace manufacturers with internal calibration standards, sending tools out to a Calibration Lab is not always feasible. Our equipment empowers customers to calibrate transducers on-site, ensuring minimal downtime and full control over calibration procedures.

Whether you are looking to build a complete setup or expand your existing capabilities, A.K.O.’s calibration solutions help you meet your performance and compliance goals. Our calibration experts are ready to assist you in the selection of torque transducer calibration stands and equipment that will improve your processes. Explore models below and contact us for more information.

Torque Transducer Calibration Equipment: TSD Calibration Stands

TSD2042/52

The TSD2042/52 is a Torque Transducer Calibration Stand that is used to calibrate Torque Transducers up to 2000 lbf ft. The base of the Stand has adjustable leveling feet to ensure the Stand is level during calibration. It is used with the TSD1017 Angle bracket to provide a sturdy base for calibrating Torque Transducers.

TSD6542/52

The TSD6542/52 is a Torque Transducer Calibration Stand that is used to calibrate Torque Transducers up to 6500 lbf ft. The base of the Stand has adjustable leveling feet to ensure the Stand is level during calibration. It is used with the TSD6517 Angle bracket to provide a sturdy base for calibrating Torque Transducers.

TSD10042/52

The TSD10042/52 is a Torque Transducer Calibration Stand that is used to calibrate Torque Transducers up to 10000 lbf ft. The base of the Stand has adjustable leveling feet to ensure the Stand is level during calibration. It is used with the TSD10017 Angle bracket to provide a sturdy base for calibrating Torque Transducers.

TSD20042/52

The TSD20042/52 is a Torque Transducer Calibration Stand that is used to calibrate Torque Transducers up to 20000 lbf ft. The base of the Stand has adjustable leveling feet to ensure the Stand is level during calibration. It is used with the TSD20017 Angle bracket to provide a sturdy base for calibrating Torque Transducers.

Transducer Calibration Arms

To support the precision and versatility of our torque transducer calibration stands, A.K.O. offers a variety of transducer calibration arms designed for different torque capacities and applications. These arms are engineered for accurate force application during calibration and are compatible with both standard and custom setups.

Use the chart below to compare calibration arm models and contact our experts to help select the one that best fits your torque transducer calibration needs.

Information about our calibration arms torque transducer calibration equipment can be viewed in this chart, including cable type, torque capacity, and more

 

Calibration Weights

A.K.O. offers a wide range of precision calibration weights to pair with our torque transducer calibration stands and arms. These weights are manufactured to exacting standards and are available in various sizes and increments to match your calibration requirements.

Refer to the chart below to select the appropriate weights for your system based on torque range and application.

Compare weights for deadweight transducer calibration with pipe handle and slotted disc information for our torque transducer calibration equipment

Weights used for deadweight transducer calibration

Torque Transducer Calibration Equipment: TSD Angle Brackets

Our torque transducer calibration equipment includes the TSD6517 angle bracket

TSD6517

TSD6517 is an adjustable angle plate used for Torque Transducer calibration and is mounted on the TSD6542/52 Calibration stand, or can be mounted to a work bench. It has adjustable set screws on both sides of the plate to adjust the Torque Arm height when attached to the Torque Transducer.

 

Our torque transducer calibration equipment includes the TSD1017 angle bracket for transducer calibration

TSD1017

TSD1017 is an angle plate used for Torque Transducer calibration and is mounted on a TSD2042/52 Calibration stand, on a TSD2060 Click Wrench System, or can be mounted to a work bench. 

TSD10017

TSD10017 is an angle plate used for Torque Transducer calibration and is mounted on a TSD10042/52 Calibration stand. 

TSD20017

TSD20017 is an angle plate used for Torque Transducer calibration and is mounted on a TSD20042/52 Calibration stand. 

Your Trusted Source for Torque Transducer Calibration Stands and Equipment

For over 100 years A.K.O., Inc. has been a leading manufacturer and ISO 17025 calibration service provider to the torque calibration industry. We take tremendous pride in manufacturing systems to meet each of our unique customer’s application needs while also providing world-class torque calibration services.

If you have questions about our torque transducer calibration stands and equipment or any of A.K.O.’s suite of products and services, our expert team is here to help. Fill out our contact form, call 860-298-9765 or email info@akotorque.com.

Torque transducer calibration equipment manufactured by AKO Torque in the USA.

© 2025 A.K.O., Inc. | Sitemap | Privacy Policy

Skip to content