Transducer Calibration Equipment

Durable Torque Transducer Calibration Stands

A.K.O. understands that some customers may need to perform transducer calibration In-House with their own torque transducer calibration equipment, instead of sending them out to a Calibration Lab. A customer may have a need for an extremely short Torque Transducer calibration turn-around time due to work volume. A Nuclear Power Plant may not be able to send out their equipment for calibration due to access restrictions, such as in a Hot Lab. An airplane manufacturer may need to perform their own calibrations to have control of their torque standards to ensure quality control. In order to help our customers overcome challenges like these, we offer a range of torque transducer calibration equipment, including Calibration Stands, Torque Arms, Weight Pans, and Weights so our customers can calibrate their own equipment.

Torque Transducer Calibration Equipment: TSD Calibration Stands

TSD2042/52

The TSD2042/52 is a Torque Transducer Calibration Stand that is used to calibrate Torque Transducers up to 2000 lbf ft. The base of the Stand has adjustable leveling feet to ensure the Stand is level during calibration. It is used with the TSD1017 Angle bracket to provide a sturdy base for calibrating Torque Transducers.

TSD6542/52

The TSD6542/52 is a Torque Transducer Calibration Stand that is used to calibrate Torque Transducers up to 6500 lbf ft. The base of the Stand has adjustable leveling feet to ensure the Stand is level during calibration. It is used with the TSD6517 Angle bracket to provide a sturdy base for calibrating Torque Transducers.

TSD10042/52

The TSD10042/52 is a Torque Transducer Calibration Stand that is used to calibrate Torque Transducers up to 10000 lbf ft. The base of the Stand has adjustable leveling feet to ensure the Stand is level during calibration. It is used with the TSD10017 Angle bracket to provide a sturdy base for calibrating Torque Transducers.

TSD20042/52

The TSD20042/52 is a Torque Transducer Calibration Stand that is used to calibrate Torque Transducers up to 20000 lbf ft. The base of the Stand has adjustable leveling feet to ensure the Stand is level during calibration. It is used with the TSD20017 Angle bracket to provide a sturdy base for calibrating Torque Transducers.

Information about our calibration arms torque transducer calibration equipment can be viewed in this chart, including cable type, torque capacity, and more

 

Compare weights for deadweight transducer calibration with pipe handle and slotted disc information for our torque transducer calibration equipment

Weights used for deadweight transducer calibration

Torque Transducer Calibration Equipment: TSD Angle Brackets

Our torque transducer calibration equipment includes the TSD6517 angle bracket

TSD6517

TSD6517 is an adjustable angle plate used for Torque Transducer calibration and is mounted on the TSD6542/52 Calibration stand, or can be mounted to a work bench. It has adjustable set screws on both sides of the plate to adjust the Torque Arm height when attached to the Torque Transducer.

 

Our torque transducer calibration equipment includes the TSD1017 angle bracket for transducer calibration

TSD1017

TSD1017 is an angle plate used for Torque Transducer calibration and is mounted on a TSD2042/52 Calibration stand, on a TSD2060 Click Wrench System, or can be mounted to a work bench. 

TSD10017

TSD10017 is an angle plate used for Torque Transducer calibration and is mounted on a TSD10042/52 Calibration stand. 

TSD20017

TSD20017 is an angle plate used for Torque Transducer calibration and is mounted on a TSD20042/52 Calibration stand. 

Torque transducer calibration equipment manufactured by AKO Torque in the USA.

© 2022 A.K.O., Inc. | Sitemap | Privacy Policy

Skip to content